Atlas Model XT-100 Welding Positioner (AT-100) is a compact turntable suited for smaller weldments up to 100 pounds, properly balanced, and with the table in the horizontal position. The standard 9" table is driven by a DC permanent magnet gear head motor and precision ground and hardened secondary gearing. The grounding circuit handles up to 200 amps of welding current. Model XT-100 is suitable for stick electrode, MIG or TIG processes and is high frequency protected. Operating speed is set on the front control panel by adjusting the solid state speed control. The variable speed foot switch initiates table rotation and also allows the operator to feather the speed from slow, up to the maximum speed dialed in at the main speed control. A forward-off reverse switch is also provided along with an easily accessible 2 amp fuse for motor overload protection.
Atlas Welding Positioner & Pipemate.pdf
Atlas Model XT-200 Welding Positioner (AT-200) handles properly balanced loads up to 200 pounds with the table in the horizontal position. Model XT-200's unique base tilts the table 130° forward and 15° backward. Table angle is adjusted by means of a worm gear and locking hand nut. The standard 10" table is driven by a DC permanent magnet gear head motor and precision ground and hardened secondary gearing. The grounding circuit handles up to 200 amps of welding current and features a back mounted threaded stud for securing your ground lug. Model XT-200 is suitable for stick electrode, MIG or TIG processes and is high frequency protected. Operating speed is set on the front control panel by adjusting the solid state speed control. the variable speed foot switch initiates table rotation and also allows the operator to feather the speed from slow, up to the maximum speed dialed in at the main speed control. A forward-off reverse switch is also provided along with an easily accessible 2 amp fuse for motor overload protection.
Atlas Welding Positioner & Pipemate.pdf
Atlas Model 500 Welding Positioner (AT-500) handles those tough turning jobs with a capacity of up to 500 pound loads, properly balanced, with the table in the horizontal position. It's horse power, DC permanent magnet motor provides plenty of power and torque.. Four brass grounding brushes in contact with the table mounting boss route up to 400 amps of welding current to a fi"-13 grounding stud at the rear of the machine. Table speed is set by adjusting the speed control dial. A forward-off-reverse switch controls table rotation direction. A full speed override switch allows the operator to advance the table at full speed to a new position for intermittent or switch welding technique. The brake-on-off control allows the operator to select Dynamic Braking which stops table rotation almost instantly when the foot control is released. Model 500's foot switch controls the on-off function of the table rotation. A safety enclosure guards the foot switch. All circuit boards, switches and wiring are mounted in the front panel, which can be quickly removed for diagnostics and repair.
Atlas Welding Positioner & Pipemate.pdf
Optional Accessories:
Atlas Idler Roll (AT-IR) is a non-powered free turning roller that can be used to support one end of pipe being turned on the Atlas Pipemate. Wheel size, wheel stance and tires are identical to those on the Pipemate.
Pipemate Stand (AT-FLS) is a specially designed, heavy duty work stand for the Pipemate and Idler Roll. Dimensions: 28.125" H, 27.5" L, 24" H.
Atlas Welding Positioner & Pipemate.pdf
